Pulse Multiplier

Avatar

rudiemm
2012-01-30 14:20

Qustion:
I had an interesting incident with UFS : QWA QWA MAIN SUB

Elster Meter: 61501291

The VT and CT is in the 22kv arena and is a 3 phase system. The factors were set to 22000/110v and 50:5 Amp. The blue phase angle is significantly bigger than the red phase.
The kVa trending is unchanged and still reads infrequently at 0.2kVa.
Please help.


Tags: water tariffs
Avatar

rudiemm
2012-01-30 14:36

Answer:
I assume that the Ct and Vt Ratio's that you refer to is in Edit->MeterDetails?
Those limits are used to check data. It isn't Multiplied with the data before it is entered into the database. We use the 'Pulse Multiplier' in Edit->MeterDetails for that.
I also assume that the Ct and Vt hasn't been set directly on the meter. In order to multiply the data with 2000 before it is entered into the database one must change the 'Pulse Multiplier" from 1:1 to 2000:1 and then submit.
The new data will then be correct. The easiest way to ensure that the past data is also correct is to change the 'Last Read Up to Date & Time' to a past date such as '2011-10-06'. This means that the data from the meter will be reread and multiplied as it comes in.

Please log in to post a comment
water tariffs: