Honeywell HS100 multidrop

Avatar

sdg.marinusvz
2020-10-15 13:58

Transcribed from a support call

Can you set the multidrop of the Honeywell HS100 meter?

Avatar

sdg.marinusvz
2020-10-16 08:45

First of all, you cannot multidrop if you connect through the internal GPRS modem.

Secondly, if you communicate through the RS485, you can multidrop.

However, the multidrop address is worked out implicitly from the meter serial number, and you cannot set it.

The system will automatically work out what the DLMS HDLC multidrop address is, and communicate to the meter using that addresss.

The formula we use is as follows:

 long left  = Long.parseLong(meter.substring(meter.length()-8, meter.length()-4))+16;
     left = left << 1;
     long l1 = (left & 0xFF00);
     l1 = l1 << 1;
     left = (left & 0x00FF) | l1;
     long right = Long.parseLong(meter.substring(meter.length()-4))+16;
     right = right << 1;
     long r1 = (right & 0xFF00);
     r1 = r1 << 1;
     right = (right & 0x00FF) | r1;
     
     // put them together into what we expect to see in the HDLC...
     long all = (left << 16) | right;
     
     all = ((all&0xFF) >> 1)
         | ((all&0xFF00) >> 2)
         | ((all&0xFF0000) >> 3)
         | ((all&0xFF000000) >> 4);
     
     serverAddr = (int)all; 


Tags: honeywell hs100
Avatar

sdg.matiaan
2022-12-02 15:00
Last Edited 2022-12-02 15:01

calculator: https://set.pnpscada.com/hs100.jsp

Avatar

sdg.matiaan
2022-12-02 15:03
Last Edited 2022-12-02 15:06

Please log in to post a comment
honeywell hs100: