How do I set up Reclocks on the system for my SyM˛ meter?
sdg.marinusvz
2024-07-11 11:57
Last Edited 2024-07-11 11:59
The maximum value for the energy register in SyM˛ meters (being Unsigned64) is 0xFFFFFFFFFFFFFFFF = 18446744073709551615.
That is sufficiently huge that I'd say a meter would never reach it.
With the SyM˛ meters, that basically goes down to 0.1 Wh resolution, that is still in excess of 1.8 EWh (Exa Wh, being a quintillion Wh). The world uses about 24.3 PWh in a year (24300 TWh). So (1800 PWh / 24.3 PWh = 74) a SyM˛ meter with a CT and VT ratio of 1, can theoretically measure all the electricity used in the world for 74 years before it reclocks (at current rate of use).
With the SyM˛ meters, that basically goes down to 0.1 Wh resolution, that is still in excess of 1.8 EWh (Exa Wh, being a quintillion Wh). The world uses about 24.3 PWh in a year (24300 TWh). So (1800 PWh / 24.3 PWh = 74) a SyM˛ meter with a CT and VT ratio of 1, can theoretically measure all the electricity used in the world for 74 years before it reclocks (at current rate of use).
Therefore we do not support Reclocks for SyM˛ meters, since it is unnecessary.
However, if you do encounter an actual verified SyM˛ meter reclock, please can you comment in this thread, and we'll see what we can do.
Please log in to post a comment